 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin I2117 rev. D 12/98 SAFEIR Series 25TTS..S SURFACE MOUNTABLE PHASE CONTROL SCR Description/Features The 25TTS..S SAFEIR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. VT ITSM < 1.25V @ 16A = 300A VRRM 800 to 1600V Output Current in Typical Applications Applications NEMA FR-4 or G10 glass fabric-based epoxy with 4 oz (140m) copper Aluminum IMS, RthCA = 15C/W Aluminum IMS with heatsink, RthCA = 5C/W TA = 55C, TJ = 125C, footprint 300mm2 Single-phase Bridge 3.5 8.5 16.5 Three-phase Bridge Units 5.5 13.5 25.0 A Major Ratings and Characteristics Characteristics IT(AV) Sinusoidal waveform IRMS VRRM/ VDRM ITSM VT dv/dt di/dt TJ @ 16 A, TJ = 25C 25 up to 1600 300 1.25 500 150 - 40 to 125 A V A V V/s A/s C 25TTS..S 16 Units A D2 PAK (SMD-220) 1 www.irf.com 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 Voltage Ratings Part Number 25TTS08S 25TTS12S 25TTS16S peak reverse voltage V 800 1200 1600 VRRM, maximum peak direct voltage V 800 1200 1600 VDRM , maximum IRRM/IDRM 125C mA 10 Absolute Maximum Ratings Parameters IT(AV) Max. Average On-state Current IRMS ITSM I2t 2 25TTS..S 16 25 300 350 450 630 Units A Conditions @ TC = 93 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied Max. RMS On-state Current Max. Peak One Cycle Non-Repetitive Surge Current Max. I2 t for fusing 2 A2 s 2 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied @ 16A, TJ = 25C TJ = 125C TJ = 25 C TJ = 125 C I t VTM rt Max. I t for fusing Max. On-state Voltage Drop On-state slope resistance 6300 1.25 12.0 1.0 0.5 10 Typ. -100 Max. 100 150 A s V m V mA VT(TO) Threshold Voltage IRM/IDM Max.Reverse and Direct Leakage Current IH Holding Current VR = rated VRRM/ VDRM Anode Supply = 6V, Resistive load, Initial IT=1A mA 25TTS08S, 25TTS12S 25TTS16S mA V/s A/s Anode Supply = 6V, Resistive load IL Max. Latching Current 200 500 150 dv/dt Max. Rate of Rise of off-state Voltage di/dt Max. Rate of Rise of turned-on Current 2 www.irf.com 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 Triggering Parameters PGM Max. peak Gate Power PG(AV) Max. average Gate Power + IGM Max. paek positive Gate Current - VGM Max. paek negative Gate Voltage IGT Max. required DC Gate Current to trigger 25TTS..S 8.0 2.0 1.5 10 60 45 20 Units W Conditions A V mA Anode supply = 6V, resistive load, TJ = - 10C Anode supply = 6V, resistive load, TJ = 25C Anode supply = 6V, resistive load, TJ = 125C V Anode supply = 6V, resistive load, TJ = - 10C Anode supply = 6V, resistive load, TJ = 25C Anode supply = 6V, resistive load, TJ = 125C TJ = 125C, VDRM = rated value mA TJ = 125C, VDRM = rated value VGT Max. required DC Gate Voltage to trigger 2.5 2.0 1.0 VGD IGD Max. DC Gate Voltage not to trigger Max. DC Gate Current not to trigger 0.25 2.0 Switching Parameters tgt trr tq Typical turn-on time Typical reverse recovery time Typical turn-off time 25TTS..S 0.9 4 110 Units s TJ = 25C TJ = 125C Conditions Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction to Ambient (PCB Mount)** wt T Approximate Weight Case Style 2 (0.07) 2 25TTS..S - 40 to 125 - 40 to 125 240 1.1 40 Units C C C C/W C/W g (oz.) Conditions for 10 seconds (1.6mm from case) DC operation D Pak (SMD-220) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140m) copper 40C/W For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com 3 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) 130 25TTS.. Series R thJC (DC) = 1.1 C/W 130 25TTS.. Series R thJC (DC) = 1.1 C/W 120 120 Conduction Angle 110 Conduction Period 110 30 100 60 90 120 180 90 0 5 10 15 20 Average On-state Current (A) 100 90 60 30 80 0 5 10 90 120 180 15 20 DC 25 30 Average On-state Current (A) Fig. 1 - Current Rating Characteristics Maximum Average On-state Power Loss (W) Maximum Average On-state Power Loss (W) Fig. 2 - Current Rating Characteristics 35 30 25 20 RMS Limit 15 10 5 0 0 5 10 15 20 25 30 Average On-state Current (A) Conduction Period 25 180 120 90 60 30 RMS Limit 20 15 DC 180 120 90 60 30 10 Conduction Angle 5 25TTS.. Series T J= 125C 25TTS.. Series T J = 125C 0 0 4 8 12 16 20 Average On-state Current (A) Fig. 3 - On-state Power Loss Characteristics 350 Fig. 4 - On-state Power Loss Characteristics 400 350 300 250 200 150 25TTS.. Series 100 0.01 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) 300 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ = 125C No Voltage Reapplied Rated VRRM Reapplied 250 200 25TTS.. Series 150 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0.1 Pulse Train Duration (s) 1 Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 4 www.irf.com 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 1000 Instantaneous On-state Current (A) 100 T J= 25C 10 T J= 125C 25TTS.. Series 1 0 1 2 3 4 5 Instantaneous On-state Voltage (V) Fig. 7 - On-state Voltage Drop Characteristics Transient Thermal Impedance Z thJC (C/W) 10 Steady State Value (DC Operation) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 25TTS.. Series 0.01 0.0001 0.1 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Gate Characteristics 100 Instantaneous Gate Voltage (V) 10 Rectangular gate pulse a)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b)Recommended load line for <= 30% rated di/dt: 10 V, 65 ohms tr = 1 s, tp >= 6 s (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a) (b) TJ = -10 C TJ = 25 C TJ = 125 C 1 (4) (3) (2) (1) VGD IGD 0.1 0.001 0.01 25TTS.. Series 0.1 1 Frequency Limited by PG(AV) 10 100 Instantaneous Gate Current (A) Fig. 9 - Thermal Impedance ZthJC Characteristics www.irf.com 5 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 Marking Information EXAMPLE: THIS IS AN 25TTS16S INTERNATIONAL RECTIFIER LOGO (A) 25TTS16S PART NUMBER 9G3A ASSEMBLY LOT CODE 9512 DATE CODE (YYWW) (K) (G) YY = YEAR WW = WEEK Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) DIA. 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) TRL 24.30 (0.957) 23.90 (0.941) 10.90 (0.429) 10.70 (0.421) 4.72 (0.186) 4.52 (0.178) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. Dimensions in millimeters and inches 24.40 (0.961) SMD-220 Tape & Reel When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 26.40 (1.039) 360 (14.173) DIA. MAX. 60 (2.362) DIA. MIN. 6 www.irf.com 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED F OOTPRINT 11.43 (0.45) (K) 1 (K) Cathode 2 (A) Anode 3 (G) Gate 1 (G) 3 4.57 (0.18) 8.89 (0.3 5) 4.32 (0.17) 2 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0 .20) REF. (A) 3.81 (0.15) 2.08 (0.08) Dimensions in millimeters and inches 2X 2.54 (0 .10) 2X Ordering Information Table Device Code 25 1 1 2 3 4 5 6 7 - T 2 T 3 S 4 16 5 S 6 TRL 7 2 (A) Current Rating, RMS value Circuit Configuration T = Single Thyristor Package T = TO-220AC Type of Silicon S = Converter Grade Voltage code: Code x 100 = VRRM Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel S = TO-220 D2Pak (SMD 220) Version 08 = 800V 12 = 1200V 16 = 1600V 1 (K) (G) 3 www.irf.com 7 25TTS..S SAFEIR Series Bulletin I2117 rev. D 12/98 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Data and specifications subject to change without notice. Fax-On-Demand: +44 1883 733420 8 www.irf.com |
Price & Availability of 25TTS12STRR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |